GT PRODUCTS XE-5964 is a stable oil in water emulsion containing 30% of a 350cs dimethyl sili cone fluid. It is intended for use in aqueous systems or where water dilution is desired.
GT PRODUCTS XE-5964 has been found to be very effective in a wide variety of applications, including:
TEXTILE- As a fiber and thread lubricant. As a fabric finish to impart a soft hand and good processability.
RUBBER & PLASTIC- As a mold release agent.
AUTOMOTIVE, HOUSEHOLD, and INSTITUTIONAL PRODUCTS For automotive and furniture polishes, leather and vinyl cleaners.
| TYPICAL PROPERTIES | |
|---|---|
| Physical Form: Color: Emulsion Type: Active Silicone (% by wt.) Specific Gravity: | Oil in Water Emulsion Milk White Non-ionic 30 0.98 |
XE-5964 is a 30% emulsion that was formulated to meet FDA Regulation 21 CFR 173.340.
GT PRODUCTS XE-5964 can be used as is or it can be further diluted with water prior to use. It is recommended that GT-XE-5964 be added to the water with low shear or mild agitation. A dilute bath of GT PRODUCTS™ XE-5964 may require mild agitation to prevent separation.
GT PRODUCTS XE-5964 is compatible with a wide variety of bath additives, but compatibility of any mixture must be confirmed before use.
STORAGE AND HANDLING.
GT PRODUCTS XE-5964 is available in 5 gallon pails and 55 gallon drums. GT PRODUCTS™ X5964 should be stored at temperatures below 90 F, and away from direct sunlight. DO NOT FREEZE.