GTP Ultra Set 401
P
Description UltraSet 401 is a low viscosity rapid setting urethane compound polymer with high strength and durometer. The rapid cure properties of UltraSet 401 allows rapid demold. Low visco sity and 1:1 by volume ratio makes for easy hand mixing and application.
| Typical Properties Component A Component B Mixed | Viscosity 150 cps 800 cps 600 cps | Specific Gravity 1.19 1.04 1.12 | Weight Per Gallon 9.89 lb. 8.71 lb. 9.30 lb. |
| Mixing Ratio | By volume By weight | 1 part A to 1 part B 100 parts A to 88 parts B | |
| Work life Demold time | Set time and Demo | ld depend on temperature and relative humidity | 8-10 minutes @ 72° F 20-30 minutes @ 72° F |
| Physical Properties Hardness Tensile strength Elongation | Test Method ASTM 2240 ASTM-D 412 ASTM-D 412 | Value 40 Shore D 2800 200 % |
Cubic inch per lb. of product 25.19
Linear shrinkage ASTM D-2566 .0052
Colors Gray
Shelf Life UltraSet 401 is shipped from the factory in sealed containers. The containers should be stored in a cool, dry area that is protected from direct sunlight and moisture. Storage te mperatures should not exceed 80° F. The shelf life of factory sealed containers stored under these conditions is six months. Containers that have been opened should be resealed immed iately after material has been removed in order to prevent solvent evaporation.
Packaging UltraSet 401 is available in convenie nt 2 -quart, 2 -gallon, 10 -gallon, 60 -gallon and 100 gallon kits. UltraSet 401 has a non-hazardous rating for shipping.