GTP UltraSet 350
P
Description GTP GTP UltraSet 350 is a low viscosity, rapid setting, urethane casting compound polymer with high strength and durometer. The rapid cure properties of GTP GTP UltraSet 350 allows rapid d e-mold. Low viscosity and 1:2 by volume mix ratio makes for easy hand mixing and application.
| Typical Properties Component A | Viscosity 150 cps | Specific Gravity 1.22 | Weight Per Gallon 10.2 lb. | ||
|---|---|---|---|---|---|
| Component B | 800 cps | 1.04 | 8.69 lb. | ||
| Mixed | 600 cps | 1.10 | 9.19 lb. | ||
| Mixing Ratio | By volume | 1 part A to 2 parts B | |||
| By weight | 59 parts A to 100 parts B | ||||
| Work life | 8-10 minutes @ 72° F | ||||
| Demold time | 20-30 minutes @ 72° F | ||||
| Set time and Demold depend on temperature and relative humidity | |||||
| Physical Properties Hardness | Test MethodASTM 2240 | Value 55 Shore D | |||
| Tensile strength | ASTM-D 412 | 2800 | |||
| Elongation | ASTM-D 412 | 250 % | |||
| Cubic inch per lb. of product | 25.19 | ||||
| Linear shrinkage | ASTM D-2566 | .0052 | |||
| Color | Yellow | ||||
Shelf Life GTP GTP UltraSet 350 is shipped from the factory in sealed containers. The containers should be stored in a cool, dry area that is protected from direct sunlight and mo isture. Storage temperatures should not exceed 80° F. The shelf life of factory sealed containers stored under these conditions is six months. Containers that have been opened should be resealed immediately after material has been removed in order to prevent solvent evaporation.
Packaging GTP GTP UltraSet 350 is available in convenient 3 -quart, 3 -gallon, 15-gallon, 90-gallon and 150gallon kits. GTP GTP UltraSet 350 has a non-hazardous rating for shipping.