GTP RM 150

Description GTP RM150 is a low viscosity, rapid setting, rigid urethane compound with high strength and durometer. This system will cure quickly to a hard, tough impact resistant casting. GTP RM150 is non -sensitive to moisture after curing. The 1:1, by volume, mix ratio makes for easy hand or machine mix. GTP RM150 is recommended in applications where a “thermoplastic feel” is desired.

Typical Properties Component A	Viscosity 100 cps	Specific Gravity 1.21			Weight Per Gallon 10.09 lb.
Component B	250 cps	.97			8.09 lb.
Mixed	200 cps	1.09			9.09 lb.
Mixing Ratio	By volume				100 parts A to 100 parts B
	By weight				100 parts A to 80 parts B
Work life					3-5 minutes @ 77° F
Demold time					20-30 minutes @ 77° F
	Set time and Demold depend on temperature and relative humidity
Physical Properties	Test Method		Value
Hardness	ASTM 2240		75 Shore D
Tensile strength	ASTM-D 638			5600
Elongation	ASTM-D 638			3.5 %
Specific gravity (cured)	ASTM D-792			1.062
Linear shrinkage	ASTM D-2566			.0029 in/in
Deflection temperature	ASTM D-758			135° F
Machinability				Excellent
Cubic inch per lb. of product				26
ompression	ASTM D-695			3,985

Thermal coefficient of expansion (in/in/F) ASTM D-696 13.2X10 Results obtained from a 7-day room temperature cure

Color Light Cream

Shelf Life GTP RM150 is shipped from the factory in sealed containers. The containers should be stored in a cool, dry area that is protected from direct sunlight and moisture. Storage tem peratures should not exceed 80° F. The shelf life of factory sealed containers stored under these conditions is six months. Cont ainers that have been opened should be resealed immediately after material has been removed in order to prevent solvent evapor ation.

Packaging GTP RM150 is available in convenient 2-quart, 2-gallon, 10-gallon and 100-gallon kits. GTP RM150 has a non-hazardous rating for shipping.